Furniture and Home Care Guide

At casviquo, we believe that proper care can help keep furniture and home products looking their best and functioning well over time. This guide provides general recommendations for cleaning, handling, storage, and everyday maintenance.

Because different products may use different materials, finishes, construction methods, and components, always follow the care instructions supplied with the specific product. The guidance below is general information and does not replace product-specific manufacturer instructions.

1. General Care Principles

Regular, gentle maintenance is often the best way to preserve the appearance of furniture and household items.

Remove dust regularly using a soft, clean cloth.
Clean spills promptly to reduce the possibility of stains.
Avoid excessive moisture unless the product instructions permit it.
Keep products away from unnecessary heat and prolonged direct sunlight.
Use suitable cleaning materials for the specific surface.
Inspect fittings, joints, and moving parts periodically.

Always test an unfamiliar cleaning method on a small, inconspicuous area first, where appropriate.

2. Wooden Furniture

Wooden surfaces may respond to changes in humidity, temperature, sunlight, and moisture. Use a soft dry or slightly damp cloth for routine cleaning, then dry the surface promptly.

Avoid leaving wet objects, hot containers, or spilled liquids on wooden furniture. Use protective mats or coasters where appropriate.

Do not use abrasive pads, strong solvents, or harsh chemical cleaners unless the product instructions specifically permit them. These substances may affect the finish or surface appearance.

Natural wood patterns and color variations may be normal characteristics of the material rather than defects.

3. Metal Surfaces

Metal furniture and components can generally be maintained by wiping them with a soft cloth. For ordinary dirt, use a lightly dampened cloth and dry the surface afterward.

Avoid prolonged exposure to moisture where corrosion may be a concern. Do not use abrasive materials that may scratch coatings or protective finishes.

If a product has moving metal parts, follow the supplied instructions for inspection and maintenance. Do not apply lubricants unless they are suitable for the specific component.

4. Glass and Smooth Surfaces

Glass surfaces should be handled carefully to reduce the risk of scratches, chips, or breakage.

Use a suitable soft cloth and an appropriate glass cleaner when permitted by the product instructions. Avoid placing heavy or sharp objects directly on delicate surfaces.

Check glass edges and supporting fittings periodically. If you notice cracks, chips, or structural damage, stop using the affected item and seek appropriate assistance.

5. Fabric and Upholstered Products

For upholstered furniture and fabric home products, begin with gentle dust removal using a suitable vacuum attachment or soft brush, where appropriate.

Clean spills promptly by gently blotting rather than aggressively rubbing. Rubbing may spread stains or damage fibers.

Always check the care label or product instructions before using water, detergents, stain removers, or professional cleaning services. Different fabrics may require different treatment.

Keep fabric products away from unnecessary direct sunlight where fading may occur.

6. Synthetic and Plastic Materials

Many synthetic surfaces can be cleaned with a soft cloth and mild cleaning solution, provided that the product instructions allow it.

Avoid strong solvents, concentrated chemicals, abrasive powders, and rough cleaning pads. These may discolor, scratch, or weaken certain surfaces.

Do not expose plastic components to excessive heat or open flames.

7. Daily Use and Weight Distribution

Use furniture and household products only for their intended purpose. Do not exceed stated weight limits or use a product in a way that places unusual stress on its structure.

Distribute weight evenly where appropriate. Avoid standing, jumping, or climbing on furniture unless it is specifically designed for that purpose.

For storage furniture, avoid overloading shelves, drawers, or support structures. Ensure that items are placed in a stable and balanced manner.

8. Assembly and Hardware

When a product requires assembly, follow the supplied instructions and use the recommended fittings and tools.

Do not force screws, bolts, connectors, or other components into position. Incorrect assembly may affect stability or cause damage.

After assembly, check that relevant connections are secure. Periodically inspect fittings that may loosen through normal use.

If the instructions recommend wall anchoring or other safety measures, follow them carefully. Use suitable fittings for the wall type and installation conditions.

9. Protecting Floors and Surrounding Areas

When moving furniture, lift it where reasonably possible instead of dragging it across floors. Use suitable protective pads or floor protectors when appropriate.

Do not move heavy items without sufficient assistance. Keep fingers and other body parts away from pinch points and moving mechanisms.

Before moving a product, remove loose contents and check that doors, drawers, and detachable parts are secured.

10. Humidity and Temperature

Extreme humidity and temperature changes may affect certain materials. Where possible, maintain a reasonably stable indoor environment.

Avoid placing products close to heaters, fireplaces, radiators, or other heat sources unless the product is designed for such placement.

Do not leave products in damp environments if their materials are not intended for prolonged moisture exposure.

11. Storage and Seasonal Care

Before storing household products, clean and dry them appropriately. Choose a storage location that is clean, dry, and suitable for the materials involved.

Keep small components, assembly fittings, and instructions together where possible. Protect delicate surfaces from pressure, sharp objects, and unnecessary friction.

12. Safety and Maintenance

Stop using a product if you notice serious structural damage, unstable supports, sharp broken edges, exposed electrical components, or other conditions that may create a safety risk.

Do not attempt repairs that require specialist knowledge unless you are qualified to perform them. Seek professional assistance where appropriate.